|
Applications
Use the
EZ-LIFT to move plate steel, block or round steel,
and iron material in your shop. Super-powerful
lifting magnet requires no electricity. It's
perfect for loading or unloading most workpieces
including press molds, plastic molds, machined
parts, etc. Rated for up to 4,400 lbs!
- Powerful magnet tested to hold OVER THREE
TIMES the rated load for maximum safety
- Rated for loads up to 4,400 lbs.
- Eliminates dangerous straps and
slings
- Fast, safe, efficient loading and
unloading
- Use our handy application
survey to help us determine the correct
model for your lifting needs.
Note: On all our lifting
magnets there is a built-in safety factor of 3.3
times the rated load. This means that the safety
factor is 3.3 times the maximum rated load for
each magnet. WARNING:
Never lift more than the maximum rated load.
Operation
Simply move the
lever to the "ON" position to engage the magnet.
Spring-loaded lock keeps the magnet engaged until
you release it. |
|
| Model |
Material |
Maximum
Rated
Load |
Minimum
Thickness |
| ELM-100 |
plate steel |
220 lbs. |
0.59" |
| ELM-300 |
plate steel |
660 lbs. |
0.98" |
| ELM-600 |
plate steel |
1,320 lbs. |
1.18" |
| ELM-1000 |
plate steel |
2,200 lbs. |
1.57" |
| ELM-2000 |
plate steel |
4,400 lbs. |
2.16" | |
| Model |
Material |
Maximum
Rated Load |
Maximum
Diameter |
Maximum
Length |
| ELM-100 |
round steel |
99 lbs. |
5.9" |
40" |
| ELM-300 |
round steel |
300 lbs. |
9.8" |
60" |
| ELM-600 |
round steel |
600 lbs. |
13.8" |
80" |
| ELM-1000 |
round steel |
990 lbs. |
17.8" |
98" |
| ELM-2000 |
round steel |
1980 lbs. |
21.6" |
118" | |
| Model |
A |
B |
C |
D |
E |
F |
G |
H |
Wt. |
| ELM-100 |
4.2" |
3.3" |
4.7" |
4.9" |
2.4" |
2.8" |
1.6" |
1.2" |
5.5 lbs. |
| ELM-300 |
7.1" |
6.1" |
6.1" |
7.3" |
3.6" |
3.7" |
2.0" |
1.6" |
18.9 lbs. |
| ELM-600 |
10.0" |
8.8" |
8.3" |
10.2" |
4.5" |
4.7" |
3.0" |
2.0" |
46 lbs. |
| ELM-1000 |
11.0" |
9.6" |
11.3" |
14.6" |
6.5" |
6.7" |
3.8" |
3.4" |
101 lbs. |
| ELM-2000 |
16.6" |
15.0" |
13.7" |
20.2" |
8.5" |
8.5" |
4.1" |
4.8" |
259 lbs.
| |
Lifting power depends upon carbon content of stock,
stock thickness, and surface finish.
| Thickness |
Depth |
ELM-100 |
ELM-300 |
ELM-600 |
ELM-1000 |
ELM-2000 |
| T1 |
2.36 in |
100% |
100% |
100% |
100% |
100% |
| T2 |
2.16 in |
100% |
100% |
100% |
100% |
100% |
| T3 |
1.97 in |
100% |
100% |
100% |
100% |
95% |
| T4 |
1.77 in |
100% |
100% |
100% |
100% |
90% |
| T5 |
1.57 in |
100% |
100% |
100% |
100% |
85% |
| T6 |
1.38 in |
100% |
100% |
100% |
90% |
75% |
| T7 |
1.18 in |
100% |
100% |
100% |
80% |
65% |
| T8 |
0.98 in |
100% |
100% |
90% |
70% |
55% |
| T9 |
0.79 in |
100% |
90% |
75% |
60% |
45% |
| T10 |
0.59 in |
100% |
70% |
60% |
50% |
35% |
| T11 |
0.39 in |
70% |
50% |
45% |
35% |
25% |
| T12 |
0.20 in |
40% |
30% |
25% |
20% |
15% |
Calculation Example: ELM-600, rated
lifting power is 1,320 lbs. The formula for calculating
range of lifting capacity is: T x F x M x Capacity.
T = Thickness
F = Surface Finish
M =
Material
ELM-600 Example: T8, F1 and
M2
90% x 125% x 85% x 1,320 = 1,263
lbs |
